manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 413 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 413

4-88

FACSIMILE

Contents

CALLING A FAX MACHINE AND INITIATING 
RECEPTION (Polling)

The Polling function allows the receiving machine to call the transmitting machine and initiate reception of a document in 
that machine.
Because the receiving machine initiates reception of a document, this is called "Polling Reception".

Make sure that an original is not placed in the machine when using the polling reception function.

1

Select polling reception.

(1) Touch the [Job Detail Settings] key.

(2) Touch the [Special Modes] key.

☞

SPECIAL MODES

 (page 4-60)

(3) Touch the 

 keys to switch through 

the screens.

(4) Touch the [Polling] key so that it is 

highlighted.

(5) Touch the [OK] key.

2

Enter the destination fax number.

☞

ENTERING DESTINATIONS

 (page 4-16)

•

Multiple fax numbers can be entered.

Polling will take place in the order that the numbers were entered.
Polling multiple machines is called "Serial Polling".
Up to 500 fax numbers can be entered. In this procedure, one-touch keys that have a sub-address and passcode 
cannot be used.

• To enter multiple fax numbers, touch the [Next Address] key after entering a fax number and enter the next fax 

number.

(1) Requests fax transmission.

Transmission

(2) The previously prepared 

document is transmitted.

(3) The fax is received.

Fax
Special Modes

3/3

Memory Box

Polling

Transaction 

Report

Verif.

Stamp

Own Name 

Select

OK

(4)

(5) (3)

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments