manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 129 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 129

2-27

COPIER

Contents

MANUALLY SELECTING THE RATIO 
(Preset ratios/Zoom)

Touch the [Copy Ratio] key in the base screen of copy mode to select one of five preset enlargement ratios or five (four) 
preset reduction ratios (maximum 400%, minimum 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.

1

Set the ratio.

Touch a preset ratio key and/or the zoom keys to set the ratio.
There are two setting screens. Touch the [Menu] key to switch 
between the screens.

●

Menu 

• Enlarge keys:

115%, 122% and 141% (for the AB system).
121% and 129% (for the inch system).

• Reduction keys:

70%, 81% and 86% (for the AB system).
77% and 64% (for the inch system).

• Full size key: 100%

●

Menu 

• Enlargement keys (2 to 4 ratios)

200%, 400%, any ratio (max. of two)

• Reduction keys (2 to 4 ratios)

25%, 50%, any ratio (max. of two)

• Full size key

100%

•

(A) keys

The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings 
(administrator).

• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then 

use the zoom keys for fine adjustment.

• The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.

Touch the 

 key to increase the ratio, or the 

 key to decrease the ratio. (If you continue to touch the 

/

 key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)

• As an alternative to touching the 

 

 keys, you can also directly touch the numeric value display key and 

change the value with the numeric keys.

• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image 

may not fit on the paper.

2

Touch the [OK] key.

After touching the [OK] key, make sure that a paper size 
suitable for the ratio is selected.

Copy Ratio

OK

70%

81%

Auto Image

XY Zoom

Menu

1

2

B4
A3

B5
B4

A4
A3

B4

B5

A4

A5

A4

B5

B5
B4

A5
A4

B5
A4

A3

B4

B4

B5

A3

A4

86%

115%

122%

141%

Zoom

100%

100

%

Copy Ratio

OK

50%

25%

400%

Auto Image

XY Zoom

Menu

1

2

Zoom

100%

100

%

200%

150%

75%

350%

300%

(A)

Copy Ratio

OK

70%

81%

Auto Image

XY Zoom

Menu

1

2

B4
A3

B5
B4

A4
A3

B4

B5

A4

A5

A4

B5

B5
B4

A5
A4

B5
A4

A3

B4

B4

B5

A3

A4

86%

115%

122%

141%

Zoom

100%

75

%

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments