manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 371 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 371

4-46

FACSIMILE

Contents

SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce)

When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.

In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. If, for example, the 
scan size were A4 (8-1/2" x 11") and the send size were B5 (5-1/2" x 8-1/2"), the image would be reduced before 
transmission.

• Only standard original sizes can be automatically detected.

☞

STANDARD SIZES

 (page 4-28)

• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan 

size.

☞

Specifying the original scan size (Specify using a standard size)

 (page 4-47)

☞

Specifying the original scan size (by numerical values)

 (page 4-48)

Quick File

File

Special Modes

Sub Address

Speaker

Resend

Scan

Send

Auto

Address Book

Ready to send.

Fax

Mode Switch

Job Detail

Settings

Direct TX

Memory TX

Auto Reception

Fax Memory:100%

A4

A4 (8-1/2" x 11")

The image is reduced 
to B5 (5-1/2" x 8-1/2") 
before transmission

"Scan Size"

"Send Size" is set to 
B5 (5-1/2" x 8-1/2")

Transmission

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments