Sharp MX-1100, User Manual, Page: 86 / 655

86
The original size is not
automatically selected
or the wrong size is
selected. Is the original curled or folded? The correct original size cannot be detected if the
original is curled or folded. Straighten the original.
Did you place an original smaller than
5-1/2" x 8-1/2" (A5) size? Original sizes smaller than 5-1/2" x 8-1/2" (A5) cannot
be detected. Enter the original size manually.
* When scanning a small original on the document
glass, it is convenient to place a blank sheet of paper
on top of the original which is the same size
(8-1/2" x 11" (A4), 8-1/2" x 11"R (A4R), etc.) as the
paper that you wish to use for printing.
The displayed bypass
tray paper size is not
correct. Is the bypass tray extension pulled out? When loading paper in the bypass tray, be sure to pull
out the extension to enable the paper size to be
detected correctly.
☞
LOADING PAPER IN THE BYPASS TRAY (page
48)
Problem Point to check Solution