manualshive.com logo in svg

Sharp MX-1100, User Manual, Page: 42 / 655

Share
Download
Sharp MX-1100 User Manual Download Page 42

42

Loading tab paper and transparency film

In addition to plain paper, tab paper and transparency film can also be loaded in the large capacity trays (MX-LCX5). 
This section explains the procedures for loading tab paper and transparency film, and points to note.

Loading tab paper

To use tab paper, the special guide must be attached as explained below.

Loading transparency film

When loading transparency film, load the film in the vertical orientation with the rounded corner at the top right.

1

Take out the tab paper guide.

The guide is stored inside the large capacity trays (MX-LCX5). Open the cover and take out the guide. When finished using 
tab paper, be sure to replace the guide.

2

Adjust the paper guide to the tab paper 
size and load tab paper.

To adjust the paper guide, see 

Loading paper and changing the 

paper size

 (page 40).

Place the tab paper with the print side face up so that the tab is 
to the right.

[Example]

Make sure that the positions of the tabs correspond with the originals as shown below.

3

Attach the guide to the tray.

Attach the guide over the paper.

4

Gently push the tray in and set the paper type to tab paper.

Change the paper type setting to tab paper as explained in "

PAPER TRAY SETTINGS

" (page 77) in the System Settings.

ABC

DEF

GHI

JKL

1st sheet

2nd sheet

3rd sheet

4th sheet

Bottom

Top

1st sheet

Front

side

4th sheet

3rd sheet

2nd sheet

Originals

Tab paper

Summary of Contents for MX-1100
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments