Sharp MX-1100, User Manual, Page: 380 / 655

60
3
Specify the orientation in which the
original is placed.
When specifying the orientation of the image to be transmitted,
specify the orientation of the original placed in step 1.
(1) Touch the appropriate orientation key.
If the top edge of the original is up, touch the key. If
the top edge of the original is to the left, touch the key.
(2) Touch the [OK] key.
You will return to the screen of step 2.
The original orientation is initially set to . If the original was placed with the top edge up, this step is not necessary.
4
Enter the destination fax number.
(1) Touch the [Speaker] key.
You will hear the dial tone through the machine's speaker.
(2) Touch the [Address Book] key in the base
screen.
(3) Touch the one-touch key of the desired
destination.
The icon appears in one-touch keys that contain fax
numbers.
• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot
be used.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see "
2. ENTERING DESTINATIONS " (page 25).
• After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The
speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level.
5
Wait until the connection is made and then press the [START] key ( ).
Transmission begins.
To cancel transmission...
Touch the [Speaker] key before the [START] key ( ) is pressed. The line will be disconnected and transmission will
be canceled.
• When the speaker is used, transmission takes place without scanning the original into memory.
• A destination that includes an F-code (sub-address and passcode) cannot be used.
System Settings (Administrator): Fax Dest. Confirmation Mode
This setting is used to have a destination confirmation message appear when a fax is sent. When this function is enabled, a
group key or program key containing fax destinations cannot be selected. In addition, the speaker key cannot be used and a
broadcast transmission cannot be performed.
System Settings (Administrator): Speaker Settings
The default volume level of the speaker can be changed in the "Speaker Settings".
Fax / Original OK
Auto
Auto 8 ½ x11
Scan Si z e
2-Sided
Tablet
2-Sided
Booklet
Send Si z e 100%
Image Orientation
(2) (1)
1
2
III III
GGG GGG
EEE EEE
CCC CCC
AAA AAA
JJJ JJJ
HHH HHH
FFF FFF
DDD DDD
BBB BBB
10 5 15
Sort Address
Speaker Volume
To Cc
Telephone mode.
Fax Manual
Reception
Resend Speaker
Frequent Use ABCD EFGHI JKLMN OPQRST UVWXYZ
Condition
Settings
Fax Memory:100%
(3) (1)