Sharp MX-1100, User Manual, Page: 583 / 655

13
*1 When a saddle stitch finisher or saddle unit is installed.
*2 When the color expansion kit is installed.
*3 MX-M950/M1100 only
*4 When a large capacity tray is installed.
*5 When a bypass tray is installed.
*6 When an inserter is installed.
*7 When a saddle stitch finisher or finisher is installed.
*8 When a punch module is installed.
*9 When a folding unit is installed.
■
Copy Settings
X
Optimization of a Hard Disk – 43
X
Clear All Job Log Data – 43
●
Original Size Detector Setting
44
X
Original Detection Size Combination Inch-1
X
Cancel Detection at Document Glass Disabled
●
Disabling of Devices 45
X
Disabling of Document Feeder Disabled 45
X
Disabling of Duplex Disabled 45
X
Disabling of Large Capacity Cassette *
4
Disabled 45
X
Disabling of Tray Settings Disabled 45
X
Disabling of Bypass-Tray *
5
Disabled 45
X
Disabling of Inserter *
6
Disabled 45
X
Disabling of Offset *
7
Disabled 45
X
Disabling of Stapler *
7
Disabled 45
X
Disabling of Saddle Stitch *
1
Disabled 45
X
Disabling of Punch *
8
Disabled 45
X
Disabling of Fold *
9
Disabled 45
Item Factory default setting Page
■
Copy Settings
46
●
Initial Status Settings
46
X
Paper Tray Varies depending on the machine
configuration
X
Exposure Type Auto
X
Copy Ratio 100%
X
2-Sided Copy 1-Side to 1-Side
X
Output –
Item Factory default setting Page