2. Check the staple cartridge.
Confirm that the sheets of staples in the cartridge are properly stack-
ed.
If not, slide the staples back in the direction of the arrow while press-
ing in gently on the bottom of the cartridge.
3. Reinsert the staple cartridge.
Push the staple cartridge in horizontally until it clicks securely into
place.
Then close the stapler cover.
4. Confirm that papers are stapled correctly.
Place a set of papers in the 2nd bin (below the non-sort bin), check
the stapling location, and then press the manual staple key when it
lights up.
Next, remove the papers that were placed in the 2nd bin and confirm
that they have been stapled correctly.
At this time, if the papers still have not been stapled, repeat this
procedure once again.
This completes the staple sorter installation.
If staples have become jammed.
1. Remove the stapler unit.
Open the stapler cover and remove the mounting screw securing the
unit in place.
Next, remove the staple unit.
2. Open the stapling section.
Open the stapling section by pushing up on the stapling plate while
pressing on the stapling section release lever.
3. Remove the jammed staples.
Remove the jammed staples with the supplied tool as shown in the
figure.
*
This tool can be found on the inside of the staple unit cover.
4. Close the stapling section.
Press down on the stapling plate and return it to its document posi-
tion.
Next, return the stapling section release lever to its document posi-
tion.
Staple cartridge
Stapler cover
Copy papers
Copier
Copy papers
Stapling location
Stapling section release lever
Stapling plate
Tool
Stapling plate
Stapling section
release lever
5 – 20