Sharp AR-5132, Service Manual

Page: 170 / 206

Main Sub
Item Content
Adjustment
code code range
50 10 Adjusts print
off-center
(manual feed,
cassette, ADU). The image moves 0.125 mm toward the R side for each “+1” in adjustment value.
The image moves 0.125 mm toward the F side for each “–1” in adjustment value.
• [MAGNIFICATION RATIO AUTO SELECT] key
(a) Operation/display
[PRINT]: If the entered value is valid, the current setting is updated.
(The input field remains at the same position.)
If the entered value is not valid, the input field is cleared and
the error buzzer sounds.
If any value is not entered, paper is fed in the paper feed
mode preset in the input field to make a copy.
[0-9]: Enters new settings. (The setting is displayed on the
COPIES SELECTED display.)
[MAGNIFICATION RATIO
AUTO SELECT]: Changes pages
[
→
]: Moves the input field.
[C]: Clears the input field.
[PAUSE]: No setting is made and the sub code input screen is dis-
played.
To clear the print off-center adjustment mode:
1. Turn ON the [CA] key, or
2. Turn ON/OFF the main switch (on the left-side of the copier), or
3. Enter the simulation mode and press the [CA] key to exit the simulation mode.
50 12 Adjusts
document
off-center (OC,
RADF). [Content] The document off-center can be adjusted (OC, RADF)
If the [PRINT] key is pressed after entering a sub code, the copier exits the
simulation mode and starts warming up. After warming up, the copier becomes the
copy ready state. At this time, the current document off-center setting is displayed
in the [XX] area. However, if the warming up action is finished by another sub
code, the shading/process control is omitted.
The setting can be changed with the numeric keypad. If the [PRINT] key is
pressed after entering a new value, the value is set as a new setting. You can
move from one item to another with the [
→
] key, and change the settings. The
document off-center adjustment position currently selected is displayed in the [XX]
in reverse video.
If the [PRINT] key is pressed without entering any setting, a copy can be made.
However, the multiple copy function is not available.
Adjustment range
Document off-center (OC) OF_OC: 10
∼
90 OF_OC: 10-90
document off-center (RADF) OF_DF: 10
∼
90 OF_DF: 10-90
WARMING UP.
PLEASE WAIT.
50
TRAY1 OFP_T1 [XX]
TRAY2 OFP_T2 [XX]
50
TRAY3 OFP_T3 [XX]
(0~99)
MFT OFP_M [XX]
ADU OFP_D [XX]
50
(0~99)
9 – 74