Sharp AR-5132 Service Manual Download | Manualshive

Page: 163 / 206

background image

Main

Sub

Item

Content

Adjustment

code

code

range

46

03

Inputs exposure
level adjustment
value (copy).

AE: 30-170
ME: 30-170
PH: 30-170
SPH: 30-170

SIMULATION NO.46- 3

EXPOSURE LEVEL SETTING (COPY)
AUTO    AE_3.0 (30~170) [XXX]:XXX
MANUAL    N_3.0 (30~170) [XXX]:XXX
PHOTO    P1_3.0 (30~170) [XXX]:XXX
SOFT_P  SFT_3.0 (30~170) [XXX]:XXX

[|]KEY:MOVE PRINT SW:EXECUTE

[Content] The exposure level adjustment value in copy mode can be set. The current setting

is displayed and a new setting can be entered.

*

The greater the input value, the darker copy density becomes; the smaller the
input value, the lighter copy density becomes.

(a)

Operation/display

[PRINT]:

If the entered value is valid, the current setting is updated and the next
input field is displayed. If the entered value is not valid, the input field is
cleared and the error buzzer sounds.
If any value is not entered, the setting is not updated and the screen
changes to the sub code input screen.

[0-9]:

Enters new settings.

[

→

]:

Moves the input field.

[C]:

Clears the input field.

[PAUSE]:

No setting is made and the sub code input screen is displayed.

[CA]:

The execution of the simulation is stopped and the simulation is terminated.

07

Inputs tone
adjustment
value (copy).

AE: 1-20
ME: 1-20
PH: 1-20
SPH: 1-20

SIMULATION NO.46- 7

TONE ADJUSTMENT SETTING (COPY)
AUTO    AE_3.0  (1~20)  [XX]:XX
MANUAL    N_3.0  (1~20)  [XX]:XX
PHOTO    P1_3.0  (1~20)  [XX]:XX
SOFT_P  SFT_3.0 (1~20) [XX]:XX

[|]KEY:MOVE PRINT SW:EXECUTE

[Content] The exposure level adjustment value in the copy mode can be set. The current

setting is displayed and a new setting can be entered.

*

The greater the input value, the stronger tone becomes; the smaller the input
value, the weaker tone becomes.

(a)

Operation/display

[PRINT]:

If the entered value is valid, the current setting is updated and the next
input field is displayed. If the entered value is not valid, the input field is
cleared and the error buzzer sounds.
If any value is not entered, the setting is not updated and the screen
changes to the sub code input screen.

[0-9]:

Enters new settings.

[

→

]:

Moves the input field.

[C]:

Clears the input field.

[PAUSE]:

No setting is made and the sub code input screen is displayed.

[CA]:

The execution of the simulation is stopped and the simulation is terminated.

9 – 67

«
...
161
162
163
164
165
...
»

Summary of Contents for AR-5132















































































































































































































Reviews:

No comments

Related manuals for AR-5132

Brand: Oce Pages: 389

Brand: Olivetti Pages: 211

Brand: Olivetti Pages: 2

Brand: Neopost Pages: 139

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands