Main
Sub
Item
Content
Adjustment
code
code
range
26
26
Sets power
save destination.
• Power save destination setting screen
SIMULATION NO.26-26
POWER SAVE DESTINATION SETTING [X]:_
0.OFF
1.A
2.S
INPUT SETUP VALUE AND PRESS PRINT SW
[Content] Used to set the power save destination.
The power save time set by key operation P21 differs depending on the set
destination.
Power save destination
Power save set time (Key operation P21)
0 (OFF):
00:00 – 24:00 (C: Cancel)
1 (A) :
00:10 – 02:00
2 (S) :
00:10 – 00:20
(a)
Operation/display
[START]:
If the input value is valid, the current set value is renewed and the machine
goes to the next input field.
If the input value is invalid, the input field is cleared and the error buzzer
sounds.
If there is no input, the value is not set and the machine goes to the sub
code input screen.
[0-2]:
The operation is executed and the machine goes to the sub code input
screen.
[CLEAR]:
The input field is cleared.
[PAUSE]:
The value is not set and the machine goes to the sub code input screen.
[CA]:
The execution is stopped and the simulation is terminated.
27
Sets image
density mode.
SIMULATION NO.26-27
IMAGE DENSITY MODE SETTING
AUTO [X]: X 1.(PEN) 2.(ORG)
MANUAL [X]: X 1.(PEN) 2.(ORG)
PHOTO [X]: X 1.(PHOTO1) 2.(PHOTO2)
SOFT_P_[X]: X 1.(SOFT_P1) 2.(SOFT_P2)
[|]KEY:MOVE PRINT SW:EXECUTE
[Content] The image density mode can be set. The current setting is displayed in the [X] and
a new setting can be entered.
(a)
Operation/display
[PRINT]:
If the entered value is valid, the current setting is updated and the cursor
moves to the next input field.
If the entered value is not valid, the input field is cleared and the error
buzzer sounds. If any value is not entered, the setting remains unchanged
and the sub code input screen is displayed.
[1-2]:
Enters new settings
[
→
]:
Moves the next input field.
[C]:
Clears the input field.
[PAUSE]:
No setting is made and the sub code input screen is displayed.
[CA]:
The execution of the simulation is stopped and the simulation is terminated.
9 – 50