System Manual V2 – MOVITRAC® B
221
10
Status displays
Operation
10.3
Status displays
10.3.1 FBG11B keypad
If the status is "Drive enabled", the display will show the calculated actual speed.
Status of binary
inputs/outputs
Parameter P039 (binary inputs) and parameter P059 (binary outputs) are adopted in the
parameter menu as display parameters. The status is displayed as binary. Every binary
input or output has two segments vertically on top of one another of the 7-segment
display assigned to it. The upper segment lights up when the binary input or output is
set, and the lower segment lights up when the binary input or output is not set. The two
7-segment displays on the right are displayed if P039 (di = binary inputs ) or P059 (do =
binary outputs) are output.
Examples:
Above: Input status: DI00 = 1 / DI01 = 0 / DI02 = 1 / DI03 = 1 / DI04 = 1 / DI05 = 0
Bottom: Output status: DO01 = 1 / DO02 = 0 / DO03 = 1
Status
Display
Drive "Controller inhibit"
oFF
Drive "No enable"
StoP
Drive "Enable"
8888
(actual speed)
Factory setting
SEt
(Set)
Standstill current
dc
24 V operation
24U
0
0
I
Summary of Contents for MOVITRAC MC07B0037-2A3-4-00
Page 250: ......
