System Manual V2 – MOVITRAC® B
187
9
Preliminary work and resources
Startup
9.3
Preliminary work and resources
•
Check the installation.
9.3.1
Preliminary work and resources on the MOVITRAC
®
B basic unit
•
Connect the supply system and the motor.
•
Connect the signal terminals.
•
Switch on the power supply system.
9.3.2
Preliminary work and resources on MOVITRAC
®
B with keypad
•
Connect the supply system and the motor.
Do not connect signal terminals!
•
Switch on the power supply system.
•
The display shows
Stop
.
•
Program the signal terminals.
•
Set the parameters correctly (e.g. ramps).
•
Check the set terminal assignment ( P601 ... P622).
•
Switch off the power supply system.
•
Connect the signal terminals.
•
Switch on the power supply system.
HAZARD!
Risk of crushing if the motor starts up unintentionally.
Severe or fatal injuries.
•
Ensure that the motor cannot start inadvertently, for example, by removing the
electronics terminal block X13.
•
Additional safety precautions must be taken depending on the application, such as
monitoring systems or mechanical protection devices, to avoid injury to people and
damage to machinery.
NOTE
The inverter automatically changes parameter values once you perform a startup.
0
0
I
Summary of Contents for MOVITRAC MC07B0037-2A3-4-00
Page 250: ......
