SEW MOVITRAC MC07B0037-2A3-4-00, System Manual

Page: 87 / 252

System Manual V2 – MOVITRAC® B
87
5
Explanation of the parameters
Parameters
009 Output current [A] Apparent current at the inverter output, displayed in AC A.
01_ Status displays
010 Inverter status Status of the unit output stage:
•
INHIBITED
• ENABLED
011 Operating status The following operating states are available:
•
24 V OPERATION
• CONTROLLER INHIBIT
• NO ENABLE
• CURRENT AT STANDSTILL
• ENABLE
• FACTORY SETTING
• ERROR
• SAFE STOP
012 Error status Fault number and fault in plain text.
013 Current parameter set Parameter set 1 or 2.
014 Heat sink temperature [°C] Heat sink temperature of the inverter.
02_ Analog setpoints
020 Analog input AI1 [V] Voltage 0 ... +10 V at analog input AI1. When S11 = ON and P112 AI1 operating
mode :
• = NMAX, 0 ... 20 mA : Display 0 ... 10 V
= →
0 ... 20 mA
• = NMAX, 4 ... 20 mA : Display 2 ... 10 V
= →
4 ... 20 mA
021 Analog input AI2 (optional) Unit: [V]
Voltage (-10 V ... +10 V)
03_ Binary inputs
030 Binary input DI00 Status of binary input DI00 (Fault reset = factory setting)
031 Binary input DI01 Status of binary input DI01 (CW/STOP= fixed assignment)
032 Binary input DI02 Status of binary input DI02 (CCW/STOP = factory setting)
033 Binary input DI03 Status of binary input DI03 (ENABLE = factory setting)
034 Binary input DI04 Status of binary input DI04 (n11/n21 = factory setting)
035 Binary input DI05 Status of binary input DI05 (n12/n22 = factory setting)
039 Binary inputs DI00 ... DI05 Collective display of binary inputs.
05_ Binary outputs
051 Binary output DO01 Status of binary output DO01 (/FAULT = factory setting)
052 Binary output DO02 Status of binary output DO02 (BRAKE RELEASED = factory setting)
053 Binary output DO03 Status of binary output DO03 (READY FOR OPERATION = factory setting)
059 Binary outputs DO01 ... DO03 Collective display of binary outputs.
07_ Unit data
070 Unit type The unit type is displayed, e.g. MC07B0008-2B1
071 Rated output current [A] The rated unit current is displayed in [A]
076 Firmware basic unit Part number and firmware version
077 DBG firmware Part number and firmware version
No. FBG Name Description
P
i
f
kVA
Hz
n