System Manual V2 – MOVITRAC® B
17
4
CE marking, UL approval and C-Tick
Technical Data
4
Technical Data
4.1
CE marking, UL approval and C-Tick
4.1.1
CE-marking
MOVITRAC
®
B frequency inverters comply with the regulations of the Low Voltage
Directive 73/23/EEC.
MOVITRAC
®
B frequency inverters are designed for use as components for installation
in machines and systems. They comply with the EMC product standard EN 61800-3
Variable-speed electrical drives.
Provided the installation instructions are complied with,
they satisfy the relevant requirements for the CE marking for the entire machine/system
in which they are installed, on the basis of the EMC Directive 89/336/EEC. For detailed
information on EMC compliant installation, refer to the publication "Electromagnetic
Compatibility in Drive Engineering" from SEW-EURODRIVE.
Compliance with limit classes C2 and C1 has been tested on a specified test setup.
SEW-EURODRIVE can provide detailed information on request.
The CE-mark on the nameplate indicates conformity with the low voltage directive 73/
23/EEC. We can provide a declaration of conformity on request.
4.1.2
UL approval / CSA / GOST-R certificate / C-Tick
UL and cUL approval (USA) has been granted for the following MOVITRAC
®
B units:
•
230 V / single-phase
•
230 V / 3-phase
•
400/500 V / 3-phase (0.25 ... 45 kW / 0.34 ... 60 HP)
cUL approval has been applied for the other units. cUL is equivalent to CSA approval.
The GOST-R certificate (Russia) is approved for the MOVITRAC
®
B unit series.
C-Tick approval has been granted for the entire MOVITRAC
®
B series. C-Tick certifies
conformity with ACMA (Australian Communications and Media Authority) standards.
P
i
f
kVA
Hz
n
Summary of Contents for MOVITRAC MC07B0037-2A3-4-00
Page 250: ......
