![background image](http://html1.mh-extra.com/html/sennheiser/sdc8200/sdc8200_system-manual_1240109108.webp)
Configuring the SDC 8200 system
108
왘
Choose “
Channel
”.
The current channel number is shown on the display.
왘
Choose the desired channel number and press the ENTER key to save
your setting.
The desired channel is available at the selected audio output.
Turning on/off the audio inputs or outputs
To turn the audio outputs or inputs on and off:
왘
From the central unit’s operating menu, choose “
Aux-In/Out
”.
왘
Choose the desired audio output or input.
왘
Choose “
Status
”.
The current status (“
ON
” or “
OFF
”) of the audio output or input is
shown on the display.
왘
Change the status and press the ENTER key to save your setting.
The selected audio output or input is turned on or off.
Adjusting the volume differences between the headphone outputs
You can connect headphones either to the headphone output on the front
panel of the central unit or to the Aux Out 6 output on the rear panel of the
central unit. Please note that there is a volume difference between the two
headphone outputs, so if you switch between the two outputs during a
conference, the volume can vary.
Attention! High Volume!
This is a professional conference system. Commercial use is subject to
the rules and regulations of the trade association responsible.
Sennheiser, as the manufacturer, is therefore obliged to expressly point
out possible health risks arising from use.
This system is capable of producing sound pressure exceeding
85 dB(A). 85 dB(A) is the sound pressure corresponding to the
maximum permissible volume which is by law (in some countries)
allowed to affect your hearing for the duration of a working day. It is
used as a basis according to the specifications of industrial medicine.
Higher volumes or longer durations can damage your hearing. At
higher volumes, the duration must be shortened in order to prevent
damage. The following are sure signs that you have been subjected to
excessive noise for too long a time:
y
You can hear ringing or whistling sounds in your ears.
y
You have the impression (even for a short time only) that you can no
longer hear high notes.
Aux Out 3
2
Channel
Aux Out 3
Channel = 00
Press ENTER to Save
Aux Out 3
3
Status
Aux Out 3
Status = OFF
Press ENTER to Save