![background image](http://html1.mh-extra.com/html/sennheiser/sdc8200/sdc8200_system-manual_1240109034.webp)
Operating the components of the SDC 8200 system
34
Vote 1 of 5
In “Vote 1 of 5” mode, you have the choice of five options (1 to 5):
왘
To cast your vote, press the corresponding key
below the display.
Your vote is counted.
If voting is not secret, the corresponding voting LED
lights up.
After the voting session, the result of the vote is shown on the displays
of the consoles.
Caution!
If your conference system comprises conference consoles with 3 and 5
voting keys and you carry out a voting in “Vote 1 of 5” mode, this will
falsify the voting results. In this case, always choose the “Vote 1 of 3”
mode.
Using the chip card slot of a conference console
If the conference consoles feature a chip card slot and if your system is PC
controlled, you can:
y
make sure that only authorized delegates can participate in voting
sessions.
y
take roll-call votes, i.e. you can see the name of each conference
participant and his or her voting position.
Operating the VIP units
VIP units are special delegate units which have the “rights” of a chairman
unit.
y
With a VIP unit, you can take the floor at any time, regardless of the
conference mode and without first having to be assigned the “speaking
right”.
y
If the chairperson presses the priority key
, all active conference
consoles – except for the VIP units – are turned off. The chairperson
cannot withdraw the “speaking right” from you.
y
The VIP units are operated in the same way as the delegate units.
Note!
You can configure VIP units either via the central unit’s operating menu
(see “Configuring additional VIP units (VIP)” on page 92) or via the
software control of the conference system.
Mic N.: 1024
VOTE 1 OF 5
1
2
3
4
5