![background image](http://html1.mh-extra.com/html/sennheiser/sdc8200/sdc8200_system-manual_1240109096.webp)
Configuring the SDC 8200 system
96
y
– if necessary – the second target language as described under
“Configuring the second target language (B-channel) of a booth” on
page 100.
y
– if necessary – the auto-relay interpretation for the interpreters as
described under “Enabling the auto-relay interpretation function
(Auto-floor)” on page 101.
5.
After you have configured the last booth, press the EXIT key repeatedly
until the “
Save Config.
” menu appears.
6.
Choose “
as Config 1
” or “
as Config 2
” and press the ENTER key.
The interpreter configuration is saved.
Caution!
If you exit the “
Save Config.
” menu by pressing the EXIT key, the
interpreter configuration will
not
be saved! A new interpreter
configuration is not created.
7.
Initialize all interpreter consoles on the central unit (see “Half-
automatically initializing all interpreter consoles on the central unit” on
page 101). This initialization is automatically added to the existing
configuration. Your interpretation system is now ready for operation.
Modifying the currently active interpreter configuration
You can modify the following features of the currently active interpreter
configuration:
y
the main target language (A-channel)
y
the second target language (B-channel)
y
the auto-relay interpretation for the interpreters (auto-floor)
To modify the currently active interpreter configuration:
1.
From the central unit’s operating menu, choose “
Conference
”,
“
Configuration
” and ”
Current
” one after the other.
The “
Select Booth
” menu appears.
2.
(Carry out this step once for each booth.)
Choose the booth number and modify:
y
the main target language as described under “Configuring the main
target language (A-channel) of a booth” on page 100.
y
– if necessary – the second target language as described under
“Configuring the second target language (B-channel) of a booth” on
page 100.
y
– if necessary – the auto-relay interpretation for the interpreters as
described under “Enabling the auto-relay interpretation function
(Auto-floor)” on page 101.
Save Config.
as Config. 1
Press ENTER to Save
Configuration
Current
Select Booth
Booth = 01