Operating the components of the SDC 8200 system
32
speak” LED goes off. When the chairman or the conference manager
withdraws the “speaking right” from you, the red signal light ring
and the “Microphone active” LED
on your console
go off.
Note!
You
cannot
cancel your request to speak by pressing the microphone
key
once
more!
Turning off the microphone / Cancelling a request to speak
To turn off the microphone when you have finished speaking or to cancel
a request to speak:
왘
Press the microphone key
once more.
The red signal light ring
and the “Microphone active” LED
on your
console
go off.
Adjusting the volume of the headphones connected to a conference
console
With conference consoles which feature two headphone outputs but only
one volume control (SDC 8200 C, SDC 8200 CC, SDC 8200 DV and
SDC 8200 CV), the volume control adjusts the volume for both connected
headphones.
The volume is steplessly adjustable and the volume control has no stop. At
each system start-up, the volume is automatically reset to a medium level.
Attention! High Volume!
This is a professional conference system. Commercial use is subject to
the rules and regulations of the trade association responsible.
Sennheiser, as the manufacturer, is therefore obliged to expressly point
out possible health risks arising from use.
This system is capable of producing sound pressure exceeding
85 dB(A). 85 dB(A) is the sound pressure corresponding to the
maximum permissible volume which is by law (in some countries)
allowed to affect your hearing for the duration of a working day. It is
used as a basis according to the specifications of industrial medicine.
Higher volumes or longer durations can damage your hearing. At
higher volumes, the duration must be shortened in order to prevent
damage. The following are sure signs that you have been subjected to
excessive noise for too long a time:
y
You can hear ringing or whistling sounds in your ears.
y
You have the impression (even for a short time only) that you can no
longer hear high notes.
