manualshive.com logo in svg

Sennheiser SDC8200, System Manual

Share
Download
Sennheiser SDC8200 System Manual Download Page 38

Operating the components of the SDC 8200 system

38

Adjusting the volume of the interpreter consoles’ built-in loudspeakers

To  adjust  the  volume  of  the  interpreter console’s built-in loudspeaker,
proceed as follows:

왘

Turn the control 

 to adjust the volume of the console’s built-in

loudspeaker.

Note!

The volume of the conference consoles’ built-in loudspeakers can only
be adjusted on the central unit!

Configuring the B-channel of an interpreter console

If you interpret into a second language, but also if you interpret for other
interpreters who take the relay (Auto-floor), configure the B channel of
your console as follows:

왘

Press the “B-channel” key 

 and keep it pressed.

왘

While keeping the “B-channel” key pressed, press the “MENU

왖

” or

“MENU

왔

” menu selection key 

 until the desired target language for

the B-channel is shown on the display.

Note!

The A-channel of an interpreter console has to be configured via the
central unit. The configuration of the A-channel cannot be changed on
the console.

Setting the channel to be output via the interpreter console’s built-in 
loudspeaker

To set the channel (e.g. the floor channel or an interpretation channel) to
be output via the interpreter console’s built-in loudspeaker:

왘

Press the LS CHAN. key 

 and keep it pressed.

왘

While keeping the LS CHAN key pressed, press the “MENU

왖

” or

“MENU

왔

” menu selection key 

 until the desired channel is shown on

the display.

Selecting an interpretation channel

To select an interpretation channel to be output via your headphones:

왘

Press one of the keys RELAY 1, RELAY 2 or RELAY 3 

 and keep it

pressed.

왘

While keeping one of the keys RELAY 1, RELAY 2 or RELAY 3 pressed,
press the “MENU

왖

” or “MENU

왔

” menu selection key 

 until the

desired language is shown on the display.
The pressed key RELAY 1, RELAY 2 or RELAY 3 is assigned the
interpretation channel with the selected language. 

왘

To listen to the interpretation channel assigned to one of the keys
RELAY 1, RELAY 2 or RELAY 3, press the corresponding key 

.

The LED next to the key lights up. The selected interpretation channel
is output via your headphones.

Summary of Contents for SDC8200



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands