Configuring the SDC 8200 system
113
Turning on a connected control panel
instead of controlling the SDC 8200 conference and interpretations system
via a PC with software control, you can use a control panel (optional).
The control panel is a miniature physical representation of your conference
room, allowing you to turn on or off individual conference consoles, change
the volume, change the conference mode, display the status of the
interpreter booths, etc.
The control panel will be custom tailored to your specific requirements.
To turn a connected control panel on:
왘
From the central unit’s operating menu, choose “
System
” and
“
Control Panel
” one after the other.
The current status of the control panel is shown on the display.
왘
Choose “
Status = ON
” and press the ENTER key to save your setting.
Configuring an “ambient sound” console
Optionally, you can use an “ambient sound” console with your SDC 8200
conference and interpretation system. As soon as all other consoles in the
conference room are deactivated, the “ambient sound” console
automatically turns on in order to reproduce the ambient noise within the
conference room. The “ambient sound” console enables the interpreters,
who often cannot look into the conference room, to hear what is going on
in the conference room, so that they are prepared if a speaker takes the
floor again.
Note!
You require a special “ambient sound” console and a separate
microphone! For details on how to connect these components to the
central unit, please refer to the operating manual of the “ambient
sound” console.
To turn a connected “ambient sound” console on:
왘
From the central unit’s operating menu, choose “
System
”, “
Ambient
Sound
” and “
Status
” one after the other.
왘
Choose “
Status = ON
” and press the ENTER key to turn the “ambient
sound” console on.
System
3
Control Panel
Control Panel
Status = OFF
Press ENTER to Save
System
4
Ambient Sound
Ambient Sound
1
Status
Status
Status = ON
Press ENTER to Save