![background image](http://html1.mh-extra.com/html/sennheiser/sdc8200/sdc8200_system-manual_1240109036.webp)
Operating the components of the SDC 8200 system
36
y
Stop “Vote 1/3” by pressing the key below “STOP”.
The voting result is shown on the consoles with display.
Press the key below “END” to clear the voting result from the
displays.
y
Stop “Vote 1/5” by pressing the priority key
.
The voting result is shown on the consoles with display.
Press the priority key
again to clear the voting result from the
displays.
Assigning a participant the “speaking right”
If – in “
With Request
” or “
With Req. No Clear
” mode – a participant presses
the microphone key
on his console, he makes a request to speak. All
participants who have made a request to speak will join a request-to-
speak list.
To assign the first participant from the request-to-speak list the “speaking
right” using the SDC 8200 C or SDC 8200 CC chairman unit:
왘
Press the NEXT key
.
The next participant from the request-to-speak list is assigned the
“speaking right”.
To assign the first participant from the request-to-speak list the “speaking
right” using the SDC 8200 CV chairman unit:
왘
Press the „
왖
“
und „
왔
“
menu selection key.
The first three consoles from which a request to speak has been made
are shown on the displays of all conference consoles. If you do not use
chip cards, the microphone numbers are displayed; if you use chip
cards, the delegate names stored on the chip cards are displayed (see
also next section). In addition, “
NEXT
” is shown in the lower left corner
of the display.
왘
On the left-hand side below the display, press the key which is assigned
to the text “
NEXT
”.
The next particpant from the request-to-speak list is assigned the
“speaking right”.
Showing the request-to-speak list on the displays of the conference
consoles
If – in “
With Request
” or “
With Req. No Clear
” mode – a participant presses
the microphone key
on his console, he makes a request to speak. All
participants who have made a request to speak will join a request-to-
speak list.
If the SDC 8200 CV chairman unit is configured so that the request-to-
speak list is shown on the display, this request-to-speak list is also shown
on all SDC 8200 DV conference consoles.
Mic N.: 0001
VOTE 1/3
245
002
150
YES
ABS
NO
Mic N.: 0001
RESULTS
PRIOR=END
032
041
009
015
625
1
2
3
4
5
MIC N.: 0001
REQUEST:
MIC N.0657
MIC N.0421
NEXT
MIC N.0010
MIC N.: 0001
REQUEST:
ARCHER
VAN BUUREN
NEXT
TAKAHASHI