Operating the components of the SDC 8200 system
37
To configure the SDC 8200 CV chairman unit so that the request-to-speak
list is shown on the displays of all conference consoles:
왘
On the SDC 8200 CV chairman unit, press the “
왖
” or “
왔
” menu
selection key.
The request-to-speak list is shown on the displays of all SDC 8200 DV
and SDC 8200 CV conference consoles. The microphone numbers of the
consoles from which a request to speak has been made are not shown
on the displays of the SDC 8200 CV conference consoles.
Operating the interpreter consoles
Adjusting the volume and the middle and treble response of the
headphones connected to the interpreter console
If you have connected two headphones to the interpreter console, the
volume control adjusts the volume for both headphones. At each system
start-up, the volume is automatically reset to a medium level.
Attention! High Volume!
This is a professional conference system. Commercial use is subject to
the rules and regulations of the trade association responsible.
Sennheiser, as the manufacturer, is therefore obliged to expressly point
out possible health risks arising from use.
This system is capable of producing sound pressure exceeding
85 dB(A). 85 dB(A) is the sound pressure corresponding to the
maximum permissible volume which is by law (in some countries)
allowed to affect your hearing for the duration of a working day. It is
used as a basis according to the specifications of industrial medicine.
Higher volumes or longer durations can damage your hearing. At
higher volumes, the duration must be shortened in order to prevent
damage. The following are sure signs that you have been subjected to
excessive noise for too long a time:
y
You can hear ringing or whistling sounds in your ears.
y
You have the impression (even for a short time only) that you can no
longer hear high notes.
To adjust the volume and the middle and treble response of the
headphones connected to your interpreter console:
왘
Turn the control
to adjust the volume of the connected headphones.
왘
Turn the control
to adjust the middle response of the connected
headphones.
왘
Turn the control
to adjust the treble response of the connected
headphones.