Operating the components of the SDC 8200 system
42
왘
Press the ENTER key
.
You get to the first main menu “
Conference
”.
왘
Turn the jog wheel
until the desired main menu is shown on the
display and press the ENTER key
.
You enter the desired main menu.
왘
Turn the jog wheel
until the desired submenu is shown on the
display and press the ENTER key
.
You enter the desired submenu where you can choose between
additional submenu items by using the jog wheel
or choose a setting
(in this case, the current value and the text “Press ENTER to Save” are
shown on the display).
왘
To change the current value:
Turn the jog wheel
until the desired value is shown on the display
and press the ENTER key
.
The new value is saved and you return to the previous menu level.
왘
To keep the current value unchanged:
Press the EXIT key
.
The current value remains unchanged and you return to the previous
menu level.
왘
To exit the central unit’s operating menu, press the EXIT key
repeatedly until the start display appears.
Via the central unit’s operating menu, you can
y
select one out of ten possible conference modes (see “Selecting a
conference mode” on page 89)
Note!
The selection of some of the conference modes only makes sense if
your conference and interpretation system is PC controlled
y
adjust the volume, treble, middle and bass response of the consoles’
built-in loudspeakers (see “Adjusting the audio settings for the
consoles’ built-in loudspeakers” on page 90)
y
configure the options for the conference (see “Configuring the confe-
rence system” on page 86) and interpretation system (see “Configuring
the interpretation system” on page 95)
y
initialize the conference consoles (see “Automatically initializing all con-
ference consoles” on page 86 or see “Manually initializing all conference
consoles” on page 87) and the interpreter consoles (see “Half-automati-
cally initializing all interpreter consoles on the central unit” on page 101
or see “Manually assigning an interpreter console an individual booth
number” on page 102)
y
specifiy the indication of the voting options on the displays
y
choose the audio settings for the AUX inputs and outputs of the central
unit
y
reset the conference and interpretation system (Reset)
y
configure the interpreter booths and the interpreter consoles
y
save and load the interpreter configurations
