Operating the components of the SDC 8200 system
31
왘
Signal your intention to take the floor e.g. by raising your hand or
giving another sign.
The conference manager can either assign you the “speaking right” by
turning on your microphone or ignore your request to speak.
When the conference manager turns on you microphone, the red signal
light ring
and the “Microphone active” LED
on your console light
up permanently. When the conference manager withdraws the
“speaking right” from you, the red signal light ring
and the
“Microphone active” LED
on your console
go off.
9.
In “
With request
” mode:
In this mode, the SDC 8200 system can be controlled either by the
chairman or via the PC. You can cancel your request to speak.
The chairman can use the NEXT key
(SDC 8200 C and SDC 8200 CC) or
the menu selection keys
(SDC 8200 CV) for assigning the “speaking
right” in the order of application.
If the SDC 8200 system is PC controlled, the “speaking right” can be
assigned independently of the order of application.
왘
Press the microphone key
to “apply” for a comment.
The green “Request to speak” LED
on your console starts flashing.
The chairman or the conference manager can either assign you the
“speaking right” by turning on your microphone or ignore your request
to speak.
When the chairman or the conference manager turns on your
microphone, the red signal light ring
and the “Microphone active”
LED
on your console light up permanently and the green “Request to
speak” LED goes off. When the chairman or the conference manager
withdraws the “speaking right” from you, the red signal light ring
and the “Microphone active” LED
on your console
go off.
Note!
You can cancel your request to speak by pressing the microphone key
once more.
10.
In “
With Req. No clear
” mode:
In this mode, the SDC 8200 system can be controlled either by the
chairman or via the PC. You
cannot
cancel your request to speak.
The chairman can use the NEXT key
(SDC 8200 C and SDC 8200 CC) or
the menu selection keys
(SDC 8200 CV) for assigning the “speaking
right” in the order of application.
If the SDC 8200 system is PC controlled, the “speaking right” can be
assigned independently of the order of application.
왘
Press the microphone key
to “apply” for a comment.
The green “Request to speak” LED
on your console starts flashing.
The chairman or the conference manager can either assign you the
“speaking right” by turning on your microphone or ignore your request
to speak.
When the chairman or the conference manager turns on your
microphone, the red signal light ring
and the “Microphone active”
LED
on your console light up permanently and the green “Request to
