Setting up the SDC 8200 system
55
Turning the interconnected SDC 8200 CU central units on and off
When turning on a conference and interpretation system with several
central units, it is important that the central units are turned on in the
correct order.
왘
First turn on the “master” central unit.
왘
Then turn on the “slave” central units in the order in which they are
connected to the “master”.
To turn a central unit on:
왘
Set the POWER switch
to position “I”.
The consoles which are powered via this central unit are ready for
operation as soon as they are initialized.
The start display is shown on the LC display of this central unit.
To turn a central unit off:
왘
Set the POWER switch
to position “0”.
The display goes off. All consoles which were powered via this central
unit are also turned off.
Note!
It is, however, possible to simultaneously turn on interconnected
central units via a switchable multiple socket.
Exiting the “slave” mode of a central unit
If several SDC 8200 CU central units are interconnected, the operating
controls of all “slave” central units are locked, except for the F2 function
key. With the F2 function key, you can unlock the operating controls of a
“slave”, which then automatically becomes a “master”. This allows you to
e.g. configure the AUX outputs or to divide a large conference and
interpretation system up into several smaller systems.
To unlock the operating controls of a “slave” central unit:
왘
Press the F2 function key
and keep it pressed for three seconds.
The operating controls are unlocked. The “master” icon
appears in
the upper right corner of the display.
Note!
Please note that the new “master” central unit is no longer connected
to the conference system.
To reintegrate the “slave” central unit into the conference system and to
lock the operating controls:
왘
Press the F2 function key
and keep it pressed for three seconds.
The operating controls are locked. The “slave” icon
appears in the
upper right corner of the display.
>Volume =
P1 P2 P3 P4 P5 P6
>Lautstaerke =
P1 P2 P3 P4 P5 P6
>Lautstaerke =
P1 P2 P3 P4 P5 P6