Setting up the SDC 8200 system
53
Setting up the SDC 8200 system
This chapter provides information on how to set up and operate the
SDC 8200 conference and interpretation system.
Preparing the SDC 8200 system components for set up
Conference and interpreter consoles
After unpacking the consoles, you simply have to connect them to the
central unit and initialize them.
Central unit
왘
Connect the mains cable to socket
.
왘
Connect the mains cable to the mains (100 – 240 V, 50 – 60 Hz).
Rack-mounting several SDC 8200 CU central units
For larger conference and interpretation systems with several SDC 8200 CU
central units, we recommend mounting the central units into a rack.
왘
Mount the central unit into a 19" rack and fix it to the rack by means of
four screws.
Caution!
Some furniture surfaces have been treated with varnish, polish or
synthetics which might cause stains when they come into contact with
other synthetics. Despite a thorough testing of the synthetics used by
us, we cannot rule out the possibility of staining.
Interconnecting the SDC 8200 system components
Depending on the expansion stage of your system, you have to:
y
interconnect the consoles (all expansion stages),
y
interconnect the central units (expansion stage 3),
y
connect a PC to the “master” central unit if the system is to be PC
controlled.