Configuring the SDC 8200 system
95
Configuring the interpretation system
Apart from the conference system, the SDC 8200 system comprises a
separate interpretation system. To be able to make use of the
interpretation system, you require the SDC 8200 ID interpreter consoles.
Via the “
Interpretation
” menu, you can quickly and easily configure the
interpretation system.
Working with the interpreter configuration
The following features of your interpretation system are put together in
an interpreter configuration:
y
The number of booths and the number of interpreter consoles per booth
(see “Setting the max. number of interpreter booths/languages” on
page 98 und “Setting the max. number of interpreter consoles per
booth” on page 98).
y
The operating modes between booths and within booths (see
“Configuring the operating mode between booths” on page 98 and
“Configuring the operating mode within a booth” on page 99).
y
The main target languages of the respective booths (see “Configuring
the main target language (A-channel) of a booth” on page 100).
y
The second target languages of the respective booths (see “Configuring
the second target language (B-channel) of a booth” on page 100).
y
The booth from which a relay interpretation is delivered (see “Enabling
the auto-relay interpretation function (Auto-floor)” on page 101).
y
The initialization of the interpreter consoles (see “Half-automatically
initializing all interpreter consoles on the central unit” on page 101).
You can save two different interpreter configurations in the central unit:
“
CONFIG 1
” and “
CONFIG 2
”. This allows you to quickly and easily adapt
you interpretation system to a new conference. In addition, you can
modify the currently active interpreter configuration at any time.
Creating a new interpreter configuration
To create a new interpreter configuration:
1.
Define the number of booths as described under “Setting the max.
number of interpreter booths/languages” on page 98.
If you change the number of booths after you have created and saved
the interpreter configuration, the new number of booths will
automatically be saved in the configuration.
2.
Define the number of interpreter consoles per booth as described under
“Setting the max. number of interpreter consoles per booth” on
page 98.
If you change the number of interpreter consoles after you have
created and saved the interpreter configuration, the new number of
interpreter consoles will automatically be saved in the configuration.
3.
From the central unit’s operating menu, choose “
Conference
”,
“
Configuration
” and ”
New
” one after the other.
The “
Select Booth
” menu appears.
4.
(Carry out this step once for each booth.)
Choose the booth number and configure:
y
the main target language as described under “Configuring the main
target language (A-channel) of a booth” on page 100.
Configuration
1
New
Select Booth
Booth = 01