![background image](http://html1.mh-extra.com/html/sennheiser/sdc8200/sdc8200_system-manual_1240109028.webp)
Operating the components of the SDC 8200 system
28
Operating the components of the
SDC 8200 system
Depending on the type of
delegate unit
, conference participants can:
y
listen, take the floor or make a request to speak,
y
receive simultaneous interpretation,
y
participate in voting sessions.
In addition to the functions and features of the delegate units, the
chairman unit
allows to:
y
start a voting session (SDC 8200 CV only),
y
mute all active delegate units (priority function).
The
interpreter consoles
are exclusively used by the interpreters.
The
central unit
is operated by the conference manager – either directly or
via an optional PC with software control.
Operating the delegate units
Taking the floor / Making a request to speak
In order to take the floor or make a request to speak, you have to press the
microphone key
. Depending on the conference mode chosen (1. to
10., see following section), you can either take the floor immediately or
you have to wait until your microphone is turned on.
1.
In “
Direct Access
” mode:
왘
Press the microphone key
.
If the speaker limit has not yet been reached, you can take the floor
immediately. The red signal light ring
and the “Microphone active”
LED
on your console light up permanently, indicating that you can
now take the floor.
If the speaker limit has been reached, you have to wait until one of the
current speakers has finished speaking and passes on the “speaking
right”. You then have to press the microphone key
again.