SCOV SV800 Series, User Manual

Page: 240 / 245

Appendix D: A1 application selection and parameter mapping SV800/SV800A User Manual
232
D.2 Application of air supply/exhaust fan (A1-00=2)
No. Name Factory default Description Mapping
parameter
A1-01 Control mode setting 2: V/F control V/F control for generally
using
A0-04
A1-02 G/P model selection 0: G type 1:P type A0-12
A1-03 Run command input
selection
0: Keyboard control 1: Terminal control
2: Communication control
d1-00
A1-04 Main frequency
command input
selection
0: Keyboard parameter
(E1-00) setting
(keyboard potentiometer
valid)
1: Keyboard parameter
(E1-00) setting (keyboard
potentiometer is invalid)
2: AI1
3~9: Refer to the detailed
description
d1-01
A1-05 Frequency 1 50.00Hz E1-00
A1-06 Acc. time 1 Determined with the
model
Set according to
requirements
E2-02
A1-07 Dec. time 1 Determined with the
model
Set according to
requirements
E2-03
A1-08 DI1 function . 3: Forward running Refer to Chapter 7 for
details.
H0-00
A1-09 M1 relay function 35: Running (including
DC braking)
Refer to Chapter 7 for
details.
H1-03
A1-10 TA-TB-TC relay
function
17: Inverter failure Refer to Chapter 7 for
details.
H1-13
A1-11 Upper limit frequency 50.00Hz Set according to
requirements
E0-00
A1-12 Low limit frequency 0.00Hz E0-01
A1-13 Max. frequency 50.00Hz E0-02
A1-14 Start mode selection 1: Start from Min.
frequency (E0-03)
Generally set to 0: Start by
speed tracking
d4-04
A1-15 Stop mode selection 1: deceleration stop 0: Free stop d2-06
A1-16 Anti-Regeneration stall
function Selection
0:OFF Generally set to 1: ON d2-13
A1-17 Torque boost Determined with the
model
Generally set to 0% d4-01
A1-18 Prohibit Reversal
Mode Selection
0: OFF 2: Prohibit reverse running d2-11
A1-19 DI4 function 20: Fault reset Refer to Chapter 7 for
details.
H0-03
A1-20 AI1 input signal type 0:0~10V 1:4~20mA (S2 switch
needs to be switched to
current side)
H2-00