SV800/SV800A User Manual 7 Detailed function description
135
7 Detailed function description
7.1 System parameters A group
The initial setting of the inverter is performed through the basic parameters of group A0. It
includes interface, password, access level, initialization, upload and download, monitor display,
multi-function key, motor control mode, carrier frequency, etc. Using the A1 group application
parameters can also facilitate customer debugging or use the parameter mapping function when
applying.
7.1.1 Basic parameter A0 group
The A0 group mainly used to set the operation interface, control mode, interface, password,
access level, parameters initialization, upload/download, monitor display and the multi-function
key.
No.
Name
Set range
Factory default
A0-00
Keyboard language selection
0
～
1
0
Select the LCD keyboard language.
0: Chinese
1: English (Reserved)
Note: Only valid for LCD keyboard
No.
Name
Set range
Factory default
A0-01
User password setting
0
～
65535
0
Used to set the user password. When the parameter setting value is not equal to 0, it means that
the user has set the password. After the password setting is successful and takes effect, each
time you enter the menu, you must enter the password correctly, otherwise you cannot enter the
parameter modification and viewing, Setting the user password does not affect the monitoring
parameters of the U0 group.
For the user password setting method, please refer to the operating instructions of the keyboard.
Note: Please remember the password you set.
No.
Name
Set range
Factory default
A0-02
Parameters access level
0
～
3
2
0: Only for monitoring
You can access A0-02 and the monitoring parameters in U0 group.
1: Common parameters
A0-02 and A1-XX group parameters can be accessed.
2: All parameters
All parameters can be accessed.
3: Customer application mapped parameters
A1-XX group parameters which mapped by customer application can be accessed.
Summary of Contents for SV800 Series
Page 8: ......
