Figure 113. The
Setup>Validate/Apply
screen.
Validate
The
Validate
button evaluates settings in the buffer memory without applying them.
When changes are pending, click on the
Validate
button to initiate a logical check of the
pending changes for errors. If the validation procedure detects an error or inconsistency,
it will be displayed in the Validation Result box.
Apply
The
Apply
button evaluates settings in the buffer memory and applies them. When
changes are pending, click on the
Apply
button to initiate a logical check of the pending
changes for errors and commit the changes to control memory if no errors are detected.
A successful check will be indicated in the Validation Result box.
Reset Buffer
The
Reset Buffer
button resets settings in the buffer memory to the presently active
values. It will not undo an
Apply
command. When changes are pending, click on the
Reset
button to remove pending changes and return to the setting presently located
in the control memory. The
Validate
,
Apply
, and
Reset
icons will fade to indicate no
changes are pending.
Settings are stored in the buffer memory of the control and are not active until they have
been applied. The
Validate/Apply
screen provides commands for managing settings
between the buffer memory and the active settings area of the control. See Figure 113.
178 S&C Instruction Sheet 766-530
Apply Configuration
