Samsung SRN-4000, User Manual

Page: 69 / 166

hdd Alarm Setting
For HDD malfunctions, you can set the inspection alarm output terminal, the replacement alarm output
terminal, the iSCSI alarm output terminal and the alarm time.
• Alarm
- Alarm signal will output through the alarm out port on the rear side when selected < 1 >, < 2 >, < 3 >, and < 4 >.
- If < Beep > was selected, a beep will sound.
- If < All > was selected, both beep sound and alarm signal through rear side ports will output.
• Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm
output port.
• Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified
alarm output port.
• iSCSI Alarm Output Port : If a connection to your iSCSI device is lost, a signal is sent to the designated alarm
terminal.
• Duration : Sets the alarm duration for the alarm signal and beep sound.
M
`
< Check > status means that the HDD is operating but it has problems that require technical examination.
( ) appears on the Live screen.
If a RAID is degraded or rebuilding, <
FULL NO RAID RAID SCSI
/
FULL NO RAID RAID SCSI
> will appear on the live screen.
`
< Replace > status means that the HDD has defect and requires immediate replacement.
( ) appears on the Live screen.
If a RAID has failed, <
FULL NO RAID RAID SCSI
> will appear on the live screen.
English _69
●
m
enu Se
Tup