Samsung SRN-4000, User Manual

Page: 148 / 166

Problem Action
Recording is not performed in accordance with the
settings.
y
If the recording status shows that the input data is exceeded.
Then go to Menu – Recording – Recording Setting, and set the max data
capacity to greater than the input data.
y
Exceeding of HDD performance is displayed in recording status.
Set the total recording amount referring to the table below.
No
HDD
condition
Receiving
(Mbps)
Recording (Mbps)
Internal iSCSI
1
HDD for CE
400 300 -
Non RAID
2
HDD for CE
400 300 -
RAID 5
3
HDD for CE
400 200 -
RAID 6
4
HDD for
Server
400 300 -
Non RAID
5
HDD for
Server
400 400 300
RAID 5
6
HDD for
Server
400 300 200
RAID 6
The iSCSI disconnect icon and the error message
pop up window will appear.
y
Check if the iSCSI port is connected to the network cable.
y
Check the IP address setting of the iSCSI equipment.
y
Try a ping test.
The recording screen will slow down.
y
Check if the recording spec for each HDD condition (refer to the recording
setting in menu) is appropriate for the actual recording setting.
y
Only main video frames will play if the data data processing rate exceeds the
play performance (refer to the product specifications in menu).
148_ appendix
appendix