Samsung SRN-4000, User Manual

Page: 81 / 166

Connecting and Setting the network
Networking may differ from the connection method, check your environment before setting the connection
mode.
when no router is used
• Static ip mode
- Internet connection : Static IP, leased line, and LAN environments allows connection between the NVR and
remote user.
- NVR Network Settings : Set the < network > in < interface > menu of the connected NVR to < Static >.
`
Consult your network manager for IP, Gateway and Subnet Mask.
• dhCp mode
- Internet connection : Connect the NVR directly to a cable modem, DHCP ADSL modem or FTTH network.
- NVR Network Settings : Set the <
network > in < interface > menu of the connected NVR to < dhCp >.
• pppoe
- Internet connection : An PPPoE modem is directly connected to the NVR, where the PPPoE connection
requires user ID and password.
- NVR Network Settings : Set the < network > in < interface > menu of the connected NVR to < pppoe >.
`
PPPoE < User ID > and < Password > should be the same to the PPPoE user information.
If you don't know the ID and password, consult your PPPoE service provider.
English _81
●
m
enu Se
Tup