Samsung SRN-4000, User Manual

Page: 64 / 166

•
Format : Select a device and click on format after which a format confirmation window appears.
Click on the < oK > button to format the selected storage device.
J
`
Formatting will delete all the recording data that has been saved. Be careful.
`
While formatting is ongoing, you cannot record video.
`
Do not remove a formatting device until it is finished.
•
HDD Map : You can check the location according to the assigned number for the HDDs installed inside.
`
Refer to this when servicing or installing an additional HDD.
Connecting the iSCSi
If you connect the NVR with an iSCSI device, you can search, connect and disconnect the iSCSI device.
•
iSCSI Usable Name : It displays the name of iSCSI in compliance with the iSCSI protocol format.
•
Capacity : It displays the currently used amount/total capacity of iSCSI devices.
•
Status : Displays the status of an installed iSCSI device.
List of products supported
Promise Technology vessRAID 1740i / 1840i 1ea JBOD 3ea
Adding an iSCSi device automatically
1. In the iSCSI window, click on the < Add Automatically > button.
2. On the Auto Add screen, enter the IP address and the connecting port, and click < Search >.
3. In the < iSCSi usable name > list, click on a device to add.
4. After entering ID/password, click on the < oK > button.
64_ menu setup
menu setup