Samsung SRN-4000 User Manual Download Page 135

Page: 135 / 166

Item

Description

Digital Zoom

Enlarge the image by up to 100 times as big as the current one.

Press the Zoom In ( ) button the enlarge the image; press the Zoom Out

( ) button to shrink the image.

You can also use the slide bar (

) in the pop-up window to zoom in/out.

Press ( ) on a size-changed video to restore the default zoom factor

(100%).

If you enlarge the image by more than 200%, the enlarged area will be

marked on the digital zooming screen. Click on the marked area and move it

to a desired position.

The digital zooming is applied to all backup viewer. When the digital zooming

is canceled, the video size will restore the default rate of 100%.

Screen Printout

Saves the current video's image as in an image file. Supports JPEG file format.

Prints out the current screen. You should have installed the appropriate printer

driver before you can print out the screen.

Audio

A toggle button. Each time you press this button, the audio output will toggle

between activated and deactivated.

You can adjust the volume level from 0 to 100.

Watermark

Press the button to enable file tampering detection, to detect data file forging.

Deinterlace

You can enable the De-interlace function.

Show OSD

Check the OSD checkbox to display the OSD information on the backup playback

screen.

Information such as backup date, day of the week, time, model name, and

channel number will be displayed on the screen.

Enlarge /

Reduce Timeline

Collapses the time range that is displayed on the range bar of the storage time.

You can collapse the range bar until the overall range is shortened to 24 hours.
Enlarges the time range that is displayed on the range bar of the storage time.

You can enlarge the range bar until the overall range is extended to 1 minute.

Restore Timeline

Restores the timeline to the default.

Display of storage time range

Displays the time range of a stored video file.

You can move the gridline of the range bar to select a time point to play.

Playback Control

You can adjust the video playback of the timeline.

English

_135

●

BACK

up viewer

Summary of Contents for SRN-4000







































































































































































Search results

Summary of Contents for SRN-4000

Reviews:

Related manuals for SRN-4000

Brands by name

Popular brands

Samsung SRN-4000, User Manual

Search results

Summary of Contents for SRN-4000

Reviews:

Related manuals for SRN-4000

Brands by name

Popular brands