Samsung SRN-4000 User Manual Download Page 25

Page: 25 / 166

English

_25

●

Live

error information

•

If the built-in HDD is not connected, the “NO HDD” icon (

) will be displayed in the top left corner. In this

case, make sure you contact the service center for assistance as this may cause a failure of recording,

playback or backup.

•

If the cooling fan does not work properly or has a problem, the <

fan information

> window will appear and

the fan error icon (

) will be displayed on the top left corner.

In this case, check to see if the internal fan works.

As a fan error can shorten the product life, make sure you contact the service center for assistance.

If you see the fan error icon or NO HDD, HDD FAIL icons on the screen, contact the service center for more details.

Live Screen menu

If you right click with your mouse button in live screen mode, it will launch the live screen menu where you can

access each menu.
The context menu differs depending on the state of Log in/out, split mode, and NVR operation status.

Depending on the user permissions, you may have limited access to menu items of Live View, Backup, Stop Recording,

Search, PTZ, Remote Alarm Output, and Exit.

< Split Mode Menu >

Scene Mode

►

Channel Info
Live Status
Record Status
Layout ►
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Menu
Quick Setup ►
Shutdown
Hide Launcher
Logout

< Single Mode Menu >

Scene Mode

►

Channel Info

Live Status

Record Status

Layout ►

PTZ Control

ZOOM

Audio ►

Freeze

Stop Alarm

Capture

Record

Play

Backup

Quick Setup ►

Shutdown

Hide Launcher

Logout

Summary of Contents for SRN-4000







































































































































































Search results

Summary of Contents for SRN-4000

Reviews:

Related manuals for SRN-4000

Brands by name

Popular brands

Samsung SRN-4000, User Manual

Search results

Summary of Contents for SRN-4000

Reviews:

Related manuals for SRN-4000

Brands by name

Popular brands