Samsung Multifunction MultiXpress K325 Series, User Manual

Page: 60 / 432

Wireless network setup (Optional)
60
3. Using a Network-Connected Machine
Connecting WPS
Factory default in your machine is PBC mode, which is recommended for a
typical wireless network environment.
If the machine is connected to a wired network, then you cannot connect to
it using the WPS feature. If a network cable is plugged into the network port,
remove it from the network port.
Connecting in PBC mode
Type in the ID and Password .
Use the same login ID, Password, Domain as when logging in from the
machine (see "Log-in" on page 238). If you want to change the password,
see "Security tab" on page 266.
1 Press Machine Setup > Network Settings from the display screen.
2 Press Wi-Fi .
3 Press WPS > PBC .
4 Press Start .
5 Press the WPS (PBC) button on the access point (or wireless router).
6 Follow the instruction on the display screen.
The messages are displayed on the display screen
Connecting in PIN mode
Type in the ID and Password .
Use the same login ID, Password, Domain as when logging in from the
machine (see "Log-in" on page 238). If you want to change the password,
see "Security tab" on page 266.
1
Press Machine Setup > Network Settings from the display screen.
2 Press Wi-Fi .
3
Press WPS > PIN .
4 Press Start .
5
The eight-digit PIN appears on the display.
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).