Ryobi RLT26CDY, User Manual, Page: 16 / 248

14
English (Original instructions)
EN
FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
and in good condition.
„
Maintain a firm grip on both handles while trimming.
Keep bump head below waist level. Never cut with
the bump head located over 76 cm or more above the
ground.
INSPECTION AFTER DROPPING OR OTHER IMPACTS
Thoroughly inspect the product and identify any affections
or damage with it. Any part that is damaged should be
properly repaired or replaced by an authorized service
centre.
RESIDUAL RISKS
Sogar wenn die Maschine wie vorgeschrieben benutzt
wird, ist es unmöglich ein gewisses Restrisiko vollständig
zu beseitigen. Die folgenden Gefahren können bei der
Benutzung entstehen, und der Benutzer sollte besonders
auf folgende Punkte achten:
„ Injury caused by vibration. Hold the tool by designated
handles and restrict working time and exposure.
„ Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure.
SPECIFICATION
Weight
- Without fuel, cutting attachment
and harness
4.17 kg
- Without fuel with bump head 4.38 kg
Fuel tank volume
250 cm
3
or
(0.25L)
Cutting swath
432 mm
Engine displacement 26 cm 3 / cc
Line diameter
2.4 mm
Maximum engine performance (in
accordance with ISO 8893)
0.65 kW
Maximum rotational frequency of the
spindle
12,000 min -1
Engine speed (rotational frequency) at
recommended max. spindle rotational
frequency
12,000 min -1
Engine speed (rotational frequency)
at idle
2,800-3,800
min -1
Fuel consumption (in accordance with
ISO 8893) at max. engine performance
0.33 kg/h or
(0.45 L/h)
SPECIFICATION
S p e c i f i c f u e l c o n s u m p t i o n ( i n
accordance with ISO 8893) at max.
engine performance
508 g/kW.h
or (0.7 L/
kW.h)
Vibration (in accordance with ISO 22867):
Front handle
- Idling 3.5 m/s
2
- Racing 18.5 m/s 2
- Equivalent vibration total value 13.3 m/s 2
Rear handle
- Idling 6.4 m/s
2
- Racing 16.3 m/s 2
- Equivalent vibration total value 12.4 m/s 2
Uncertainty K 1.5 m/s
2
Noise emission (in accordance with ISO 22868)
A-weighted emission sound pressure
level at the operator position
- Idling 76.4 dB (A)
- Racing 100.1 dB (A)
- Equivalent A-weight emission
sound pressure level
97.1 dB (A)
A-weighted sound power level
- Idling 86.8 dB (A)
- Racing 110.7 dB (A)
- Equivalent A-weight sound power
level
110.7 dB (A)
Uncertainty K 2.5 dB
DESCRIPTION
Please refer to the figure sheet.
1. Primer Bulb
2. Choke Lever
3. Fuel Cap
4. Starter Grip
5. Throttle Lock
6. On / Off Switch
7. Throttle Trigger
8. Rear Handle
9. Front handle
10. Shaft