![background image](http://html1.mh-extra.com/html/ryobi/rbl26bp/rbl26bp_user-manual_1503943175.webp)
English
TROUBLESHOOTING
Problem
Possible cause
Solution
Engine will not start.
No spark.
The spark plug may be damaged, remove it and check
for dirt and cracks. Replace with a new spark plug.
No fuel.
Push primer bulb until bulb is full of fuel. If bulb does
QRW¿OOSULPDU\IXHOGHOLYHU\V\VWHPLVEORFNHG&RQWDFW
DVHUYLFLQJGHDOHU,ISULPHUEXOE¿OOVHQJLQHPD\EH
ÀRRGHGSURFHHGWRQH[WLWHP
(QJLQHLVÀRRGHG
Remove spark plug, turn blower so spark plug hole is
aimed at the ground. Adjust the choke lever to “
” position and pull starter cord 10-15 times. This will
FOHDUH[FHVVIXHOIURPHQJLQH5HPRYHDQ\IXHOZKLFK
VSODVKHGRQWKHSURGXFW&OHDQDQGUHLQVWDOOVSDUNSOXJ
&OHDQXSDQ\VSLOOHGIXHODQGPRYHDWOHDVWPDZD\
before restarting. Pull starter 3 times with choke lever
at “
”. If engine does not start, rotate choke lever to
“
” position and repeat normal starting procedure. If
engine still fails to start, repeat procedure with a new
spark plug.
Starter rope now harder to pull than
when new.
&RQWDFWDVHUYLFLQJGHDOHU
Old fuel.
2QO\XVHIUHVKIXHOPL[HGZLWKUHFRPPHQGHGRLO)XHO
over 30 days old may prevent the unit from starting.
Engine starts but will not
accelerate.
&DUEXUHWRUUHTXLUHVDGMXVWPHQW
&RQWDFWDVHUYLFLQJGHDOHU
Engine starts but will only run at
high speed at high choke.
&DUEXUHWRUUHTXLUHVDGMXVWPHQW
&RQWDFWDVHUYLFLQJGHDOHU
Engine does not reach full speed
DQGHPLWVH[FHVVLYHVPRNH
&KHFNOXEULFDQWIXHOPL[WXUH
8VHIUHVKIXHODQGWKHFRUUHFWVWURNHOXEULFDQWPL[
$LU¿OWHULVGLUW\
&OHDQDLU¿OWHU5HIHUWR&OHDQLQJWKH$LU)LOWHU6FUHHQ
earlier in this manual.
Spark arrestor screen is dirty.
&RQWDFWDVHUYLFLQJGHDOHU
Engine starts, runs, and
accelerates but will not idle.
Idle speed screw on carburetor
UHTXLUHVDGMXVWPHQW
&RQWDFWDVHUYLFLQJGHDOHU
Summary of Contents for RBL26BP
