![background image](http://html1.mh-extra.com/html/ryobi/rbl26bp/rbl26bp_user-manual_1503943012.webp)
10
English (Original instructions)
Ŷ
Stop the engine and allow it to cool before refuelling,
storing or transporting the machine.
Ŷ
For refuelling and fuel mixing, chose an area away from
sources of ignition (sparks, flames etc.), Flammable
materials and which is well ventilated.
Ŷ
Do not smoke when mixing fuel or filling fuel tank.
Ŷ
Mix and store fuel in a container approved for fuel.
Keep an appropriate type of fire extinguisher nearby
for dealing with fuel fires.
Ŷ
Remember to securely refit the fuel tank filler cap
before starting the engine.
Ŷ
Wipe up any fuel spillage. Move 10 m away from
refuelling site before starting engine.
Ŷ
It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud’s
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the
fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness,
diet, smoking and work practices are all thought to
contribute to the development of the these symptoms.
There are measures that can be taken by the operator
to possibly reduce the effects of vibration:
Ɣ
Keep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather
is a major factor contributing to Raynaud’s
Syndrome.
Ɣ
After each period of operation, exercise to increase
blood circulation.
Ɣ
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and see your
doctor about these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.
Ŷ
To reduce the risk of injury associated with contacting
rotating parts, always stop the engine, remove the
spark plug wire and make sure all moving parts have
been come to a stop before
Ɣ
cleaning or clearing a blockage
Ɣ
leaving the product unattended
Ɣ
install or removing attachments
Ɣ
checking, maintenance or working on the machine
WARNING
Your back pack blower is fitted with a shoulder harness.
Carefully adjust the harness to comfortably help to
support the weight of the machine and secure it to your
back.
WARNING
Identify how to operate the quick release mechanism
and practice using it BEFORE you start using the
machine. Its correct use may prevent serious injury
in the case of an emergency. Never wear additional
clothing over the harness or otherwise restrict access
to the quick release mechanism.
BLOWER SAFETY WARNINGS
Ŷ
Wear a face filter mask in dusty conditions to reduce
the risk of injury associated with the inhalation of dust.
Ŷ
Do not point the blower nozzle in the direction of
people or pets.
Ŷ
Never place objects inside the blower tubes.
Ŷ
Do not operate the machine near open windows etc.
Ŷ
Slightly dampen surfaces in dusty conditions.
Ŷ
Use the full blower nozzle extension so the air stream
can work close to the ground.
Ŷ
Do not place blower on top of or near loose debris.
Debris may be sucked into intake vent resulting in
possible damage to the unit.
Ŷ
Check all nuts, bolts and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
Ŷ
If your blower looses power or the engine speed
increases, this may indicate a blockage to the air inlet.
As this may require the removal of the engine from
the back pack we suggest to take the machine to an
authorised service centre for inspection.
SERVICE
Servicing requires extreme care and knowledge
DQG VKRXOG EH SHUIRUPHG RQO\ E\ D TXDOL¿HG VHUYLFH
technician. For service we suggest you return the product
to your nearest authorised service centre for repair. When
servicing, use only identical replacement parts.
Summary of Contents for RBL26BP
