A. Loosely attach the wing knob
and rope guide (opening facing the
rear) to the upper handle.
B. Pull the starter rope handle and route
the starter rope through the rope
guide.Tighten the wing knob.
Remove the screws from the chute base.
Position the chute assembly on the chute
base and secure with the screws just removed.
778-15077
A
C
B
A. Remove the wing knobs and carriage bolts
from the upper portion of the lower handle.
B. Pivot the upper handle upward.
C. Reattach the wing knobs to secure
the handle.
Place the chute handle on the lower chute
aligned in the channel and snapped into place
A
B
Channel
Tab
Upper Handle
Starter Rope Handle
Wing Knobs
Chute Assembly
Lower Handle
© 2018 2M1, 2M5
CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
Fast Start Guide - Assembly
