Form No. 3396-378 Rev A
SnowMax 724 ZXR Snowthrower
Model No. 38710—Serial No. 316000001 and Up
Operator's Manual
Introduction
This machine is intended to be used by residential
homeowners. It is designed for removing snow from
paved surfaces, such as driveways and sidewalks, and
other surfaces for traffic on residential or commercial
properties. It is not designed for removing materials
other than snow, nor is it designed for clearing off gravel
surfaces.
Read this information carefully to learn how to operate and
maintain your machine properly and to avoid injury and
machine damage. You are responsible for operating the
machine properly and safely.
You may contact Toro directly at www.Toro.com for machine
and accessory information, help finding a dealer, or to register
your machine.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your machine ready.
identifies the location of the
model and serial numbers on the machine. Write the numbers
in the space provided.
Figure 1
1.
Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (
),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Figure 2
1.
Safety alert symbol
This manual uses 2 words to highlight information.
Important
calls attention to special mechanical information
and
Note
emphasizes general information worthy of special
attention.
For models with stated power, the net power of the engine was
laboratory rated by the engine manufacturer in accordance
with SAE J1940. As configured to meet safety, emission, and
operating requirements, the actual engine horsepower on this
class of snow thrower will be significantly lower.
Contents
Introduction .................................................................. 1
Safety ........................................................................... 2
Sound Pressure ....................................................... 2
Sound Power .......................................................... 2
Vibration................................................................ 2
Safety and Instructional Decals ................................. 3
Setup ............................................................................ 4
1 Unfolding the Handle ............................................ 4
2 Installing the Discharge Chute ................................ 5
3 Filling the Engine with Oil...................................... 5
Product Overview .......................................................... 6
Operation ..................................................................... 7
Before Operation ....................................................... 7
During Operation ...................................................... 7
Safety..................................................................... 7
Starting the Engine .................................................. 8
Engaging the Auger ................................................. 9
Disengaging the Auger ............................................. 9
Self-Propelling the Machine ...................................... 9
Stopping the Engine ................................................ 9
Adjusting the Discharge Chute and Chute
Deflector ............................................................ 9
Clearing a Clogged Discharge Chute .......................... 9
Operating Tips ......................................................10
After Operation ........................................................10
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3396-378* A
Summary of Contents for 38710
Page 17: ...Notes 17 ...
Page 18: ...Notes 18 ...
