RTW SurroundMonitor 11900 Series, Manual, Page: 324 / 376

9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings EN-134 SurroundMonitor 11900 Series
9.4.2 | Digital Output Routing
can be assigned to individual internal channels (L, R, etc.) inde-
pendently for the different modes. This gives the option to set
up separate output routings. This button displays the Global Output Routing menu page.
It contains the routing matrix for the digital outputs of the
digi-
tal In/Out
connector. The channels of the output connectors
• Mode
It is possible to select an individual channel mode for the
digital output section independently from the channel
mode selected for the internal processing. All channel mo-
des from
2 channel Stereo
to
Multi channel
mode are
available for the outputs. Nevertheless, the default setting
for this option will always be
Off
. This can be modified by
selecting a different channel mode here if needed.
• Digital Direct Out
For each Digital Direct Out channel (1a, 1b, …, 4a, 4b)
of the
Digital In/Out
connector, an individual internal
channel is selectable depending on the channel mode
selected (see
Mode
option). All digital input signals, the
discrete output signals and the downmixed decoder out-
puts can be directed to these outputs. The signal of the
generator
(see corresponding chapter below) and the
BLITS
output signals are available as well.
• Close
This button closes the
Global Output Routing
menu pa-
ge and returns you to the
Global Routing Settings
menu
page.