RTW SurroundMonitor 11900 Series, Manual, Page: 214 / 376

6 | First Use | 6.6 | Switching Instruments in Window 3 EN-24 SurroundMonitor 11900 Series
Toolbar in
instrument Select
mode
Short cuts of the
instruments
MODE and MORE
buttons
6.6 | Switching instruments in Window 3
Window 3 (the top left area of the display) can show several
instrument types (display modes), e. g. Surround Sound Ana-
lyzer (SSA), Vectorscope (VSC), Correlator (CORR) or RTA.
Using the Instrument Select mode the instruments can be
switched easily without loading new presets or accessing the
menu system. Depending on the version of your unit up to 14
instruments are provided.
Please proceed as follows:
1. Press the inSTR key, until the instrument in Window 3
(left) gets the white frame. The Toolbar now shows the
functions of the instrument.
2. Press the MODE key repeatedly until the MORE button in
the Toolbar turns yellow. The buttons numbered
1
to
7
in
the Toolbar switch to
instrument Select
mode and show
the first seven available instrument types.
3. If you want to choose one of the other seven instruments,
press the
MORE
key. The buttons numbered
1
to
7
in the
Toolbar now show a second level of available instrument
types.
4. Select the instrument type of your choice by pressing the
related number key. The buttons in the Toolbar numbered
1 to 7 now switch back to the Function Select mode and
show the corresponding functions of the selected instru-
ment.
5. If you want to select another instrument type, use the
MODE
key again to change into the
instrument Select
mode (as explained above) until the instrument types are
shown. Make a selection as described.
NOTE -
The choice of available instruments will vary
depending on the channel configuration of the loaded preset.
The number of the provided instruments will vary depending on
the version of your unit (11900, 11900S, 11900D, 11900SD).
Window 3 displaying
instruments
2. level of the Toolbar in
instrument Select
mode
MORE
button