RTW SurroundMonitor 11900 Series, Manual, Page: 234 / 376

8 | Instruments (Display Modes) | 8.2 | The Program Meter Instrument EN-44 SurroundMonitor 11900 Series
9. On the
Peakmeter Settings
menu page, select one of
the other
Channel Group
buttons.
10. On the selected
Channel Group
menu page, edit settings
as described in step 7.
11. Repeat steps 8 to 10 for all Channel Groups you want to
edit.
12. Select the
Save & Exit
button to store the changes and
leave the menu. The Save Preset menu page is displayed.
13. Select a User Preset of your choice to store your settings
in.
14. Use the
change name
button to edit the preset name. A
keyboard display is shown to enter a new preset name (6
characters maximum).
15. Select the
Save & Exit
button again. All changes are
stored and the unit returns to normal operation.
8.2.1.1 | Changing the parameters of the Peak Program Meter
Many parameters of PPM bargraphs, the peak hold function and the loudness indicators can be edited in the Channel Group
menus accessible by selecting the according
Peakmeter Settings
buttons.
Please proceed as follows to access these menus from normal display operation:
1. Press
Menu
. The unit changes to menu mode.
2. Select the
Edit selected preset
button.
3. Select the
Local Input/Output Routing and Instrument
Settings
menu tab. The
local Routing Settings
menu is
shown.
4. Select the
Input Routing
button.
5. Select the
Peakmeter Settings
button for the
Metering
Routing section (or another Peakmeter Settings button
for the peakmeter bargraphs you want to change).
6. On the
Peakmeter Settings
menu page, select the
Channel Group 1 button.
7. On the
Peakmeter – Channel Group 1
menu page,
combo boxes, list boxes, check boxes and buttons are
used to make the appropriate changes, e.g. measuring
standards, scales, color setups etc..
8. Select the
close
button. You will get back to the previous
menu page.