RTW SurroundMonitor 11900 Series, Manual, Page: 223 / 376

EN-33 7 | Control
EN
SurroundMonitor 11900 Series
SurroundMonitor units feature comprehensive display modes for analyzing surround, multichannel or stereo audio signals in vari-
ous ways. These modes are referred to as
instruments
.
7 | Control
• Window 1: Toolbar
The Toolbar is always visible. It contains the controls for all
the instruments’ functions and the instrument selections
and displays information on current operating modes.
• Window 2: Program Meter
The right half of the screen is normally occupied by the
Program Meter display. Depending on the settings it
shows the Peak Program Meter bargraphs with Peak
Hold and RMS (SPL) displays or the Loudness Meter
bargraphs for each channel with Momentary, Short term
and Integrated loudness value displays as well as the LRA
instrument. The Program Meter will only be hidden with
the RTA 1/6 instrument if activated.
Usually, all four windows are visible, but sometimes larger
instruments can cover other instruments. The size and screen
position of the instruments is fixed and cannot be adjusted. A
detailed description follows on the next page.
• Window 3: Selected Instruments
The upper left part of the screen is used to display the in-
struments selected with the unit‘s operational controls.
• Window 4: Status Box
Depending on the selected modes this window is used to
display current status information (e. g. selected preset),
messages etc. or a chart recorder. Some instruments co-
ver the Status Box when active.
The 11900 series front panel is equipped with the relevant
controls to operate all metering functions of the units.
For operation in parallel three different instruments and the
Toolbar with several buttons divide the display into up to four
window sections.
Window 1:
Toolbar
Window 4:
Status Box
Window 2:
Program Meter:
Peak Program Meter and Loudness Meter
Window 3:
Selected instruments
Window 3 Window 2
Window 4
Window 1