RTW SurroundMonitor 11900 Series, Manual, Page: 213 / 376

EN-23 6 | First Use | 6.5 | Switching Input Sources by using Sub Presets
EN
SurroundMonitor 11900 Series
6.5 | Switching Input Sources by using Sub Presets
NOTE -
In case the routing settings of the selected
Sub Preset do not fit your connecting scheme you will have
to adapt the routing setup of the preset. Please refer to para-
graph
Adapting the Routing for more details about this.
To switch between the (up to) 7 Sub Presets available in
a Factory or User Preset, please proceed as follows:
1. Press the
inSTR
key, until the
Program Meter
in Window
2 (right) gets the white frame. The Toolbar now shows the
functions of the Program Meter.
2. Press the
Input Sel
key. Now the names of the 7 Sub
Presets and the input connector they use are shown in
the buttons
1
to
7
of the Toolbar.
3. Select the Sub Preset of your choice by pressing one of
the numbered keys
1
to
7
. The new Sub Preset will be
loaded instantly. The unit will use the input signals fed to
the connector defined in the Sub Preset.
Used input
connector
Toolbar
(Window 1)
Name of the
Sub-Preset
Activated
Sub-Preset
Functions of the
Program Meter
input Sel
button
inSTR
button
Window 2 for the display
of the Program Meter