RTW SurroundMonitor 11900 Series, Manual, Page: 220 / 376

6 | First Use | 6.11 | Changing Scales and Reference Levels EN-30 SurroundMonitor 11900 Series
6.11 | Changing Scales and Reference Levels
4. For saving your settings and leaving the menu system
press the
Save & Exit
key. The screen shows the
Save
Global Settings? page.
5. Confirm saving the global settings by again pressing the
Save & Exit
key. The unit stores the settings and returns
to normal operation mode.
6. For aborting your settings and leaving the menu system
without any changes repeatedly press the
Abort
key until
the unit returns to normal operation mode.
The SurroundMonitor units are supporting many different reference level settings.
To modify these global parameters, plesae proceed as
follows:
1. From normal display operation, press the
Menu
key.
Accessing the menu for the first time after power on will
take some seconds for initialization.
2. Normally, the
instrument Settings
menu tab with the Ins-
trument Settings menu is shown first. Use the cursor keys
< and > to select one of the Reference Levels menu tab.
The
Reference Levels
menu page is shown.
3. Make the desired changes on the
Reference Levels
menu page.